1. Hour hand
2. Minute hand
3. Crown
4. Crown - First click
5. Second hand

Setting the time: Move crown to position 4 and turn.

Winding the watch manually: Move the crown to position 3 and turn clockwise. Only do 1-5 full rotations or until you meet slight resistance. More and you risk breaking the movement.

Additional information: This watch is mechanical, meaning it consists of mechanical parts and no battery. Instead, it's powered by a spring that needs to be wound. This is an automatic mechanical watch, which means it'll wind itself using the momentum of your hand. Since you probably don't move that much during the night, and some people have more active jobs than others, it’s a good idea to get into the habit of winding the watch slightly every morning.

• Movement: Seagull ST1646 Automatic Mechanical
• Water resistance: 3 ATM / 30 metres
• Battery: Battery-free
• Glass: Sapphire crystal
• Case material: 316L stainless steel
• Strap material: Genuine leather, 316L stainless steel
• Nickel free: Yes
• Max. wrist size: Leather strap 20.5 cm, Steel strap 21.5 cm
• Min. wrist size: Leather strap 14.5 cm, Steel strap 13.5 cm
• Strap width: 20 mm
• Case diameter: 44 mm
• Dial diameter: 36 mm
• Case thickness: 12 mm
• Crown height: 4 mm
• Lug width: 22 mm
• Lug to lug: 50 mm
• Weight: Leather strap 78 g, Steel strap 174 g

Most watches have some level of water resistance. If your watch isn’t water resistant, it may be able to handle small splashes, but don’t risk it. If it has a leather band, don’t get it wet.

• Do not move the crown or push any buttons when your watch is in contact with water, as this may let water enter the case.
  
• If your watch is not water resistant, dip a cotton swab in a bowl of warm water with a drop or two of soap in. Squeeze the tip of the cotton swab to remove most of the water and gently rub the case.
  
• If your watch is water resistant, soak a soft cloth in a bowl of warm water with two drops of mild washing-up liquid added. Wring most of the water out of the cloth and gently rub the case with it.
  
  

If your metal watch has lost some of its lustre, you can bring it back by polishing it with a special microfibre cloth for cleaning jewellery.

1. Gently wipe down the band and case to remove any dirt, dust, or fingerprints.
2. For areas such as engravings, edges, and other details that are hard to reach, use a soft toothbrush.
3. Always dry your watch with a soft cloth or towel after cleaning to remove pollutants and prevent water spots or stains from forming.

• Store your watch in a dark, dry place to avoid corrosion and discolouration of the dial.
• Always replace the battery on a quartz watch as soon as it runs out. With time, an empty battery may start leaking, damaging the watch’s movement.
• Run mechanical watches at least two days a year to prevent gears and cogs from sticking.
• You should always get your watch serviced by a professional every 3 years.

Rule of thumb: Make sure your watch is the last thing you put on and the first thing you take off.

• Take your watch off and store it safely before engaging in any activity that could damage it.
• Take it off before engaging in any activity likely to make you sweat.
• Take it off before you shower, bathe, or go for a swim.
• Take it off before cooking or cleaning.
• Take it off before you go to bed.
• Don’t expose your watch to chemicals such as cologne, sunscreen, perfume, chlorine, hair gel, etc., as these can discolour, stain, or dull surfaces.
• Try to store your watch separately in a soft enclosure to prevent scratching and rubbing.
• If your watch has closures or clasps, close these to prevent tangling.
• Keep your watch stored in a dry, dark place, and avoid heat fluctuation.

The links with arrows are removable. The arrows show in which direction the pins should be pushed.

1. Use a pin pusher and remove the first pin. Set it aside.
2. Decide how many links you want to remove and then push out the corresponding pin.
3. Remove the undesired link(s). The more links you remove, the shorter the strap will be.
4. Connect the remaining links and insert the pin to connect them.*

*You may need a small hammer to help push the pin into place.

1. To make fine adjustments to the length using the clasp pins, push the pin in on one side and move the clasp slightly to lock it in place.

2. Repeat the process on the other side of the clasp.

3. Slide the clasp until the pins pop into the desired pinholes.

To remove and change your watch strap, you’ll need:

• The watch
• A replacement strap
• A soft surface such as a cloth, t-shirt or mouse pad

You may also need:

• A spring bar tool
• Or a sharp pointed object

1. Place your watch on a soft surface. This prevents it from getting scratched or damaged.

2. If your watch has quick-release pins on the underside, push the small lever inward to release the strap.

1. If your watch has drilled lugs – small holes in the lugs extending from the main watch case – use a sharp, pointed object to push the spring bar in and release the strap. Be careful that the spring bar doesn’t slide out of the strap and get lost.

1. If your watch strap has neither of these, use a spring bar tool. This is a small tool with a v-shaped tip. Use it to compress the spring bar from the underside of the strap between the lugs on the right. Using the tool, push down the ridge of the spring bar to release the strap.

First, check the lug width of your new watch to verify that it’s 22 mm. You can find all our watch straps here. Using the filters, select only the matching width to see our selection for your watch.

If your replacement strap has quick-release bars, press the bar inward and slot it into place between the lugs. You’ll feel it ‘lock’ into position.

If your new strap doesn’t have quick-release pins, use the spring bar tool again. Place one end of the pin into place, then use the tool to compress the spring bar as you slot it in place. You’ll feel it ‘lock’ in position.

Remember to take your time and be careful not to scratch the lugs or damage the new watch strap.

If you take care of your watch and store it correctly, you should enjoy years of precision timekeeping. But even with the best care possible, you may find that your watch needs some extra attention from time to time.

Below are some common issues. If you can’t find what you’re looking for, our Customer Service team is only an email or a phone call away.

To keep the warranty on your watch valid, don’t expose it to water past the rated limit and make sure you keep the receipt.